Danfoss vlt FC 102 Programming Guide

3 Parameter Descriptions
3.1 Parameter Selection
3.1.1 Main Menu Structure
Parameters for the frequency converter are grouped into various parameter groups for easy selection of the correct
parameters for optimized operation of the frequency converter.
To programme most HVAC applications, press [Quick Menu] and select the parameters under Quick Set-up and Function Set-
ups.
Descriptions and default settings of parameters may be found in chapter 5 Parameter Lists.
Parameters: 0-** Operation and Display
Parameters: 1-** Load and Motor
Parameters: 2-** Main Menu - Brakes
Parameters: 3-** Main Menu - Reference/Ramps
Parameters: 4-** Main Menu - Limits/ Warnings
Parameters: 5-** Main Menu - Digital In/Out
Parameters: 6-** Main Menu - Analog In/Out
Parameters: 8-** Main Menu - Communications and Options
Parameters: 9-** Main Menu - PROFIBUS
Parameters: 10-** Main Menu - CAN Fieldbus
Parameters: 11-** Main Menu - LonWorks
Parameters: 13-** Main Menu - Smart Logic
Parameters: 14-** Main Menu - Special Functions
Parameters: 15-** Main Menu - Drive Information
Parameters: 16-** Main Menu - Data Readouts
Parameters: 18-** Main Menu - Data Readouts 2
Parameters: 20-** Main Menu - FC Closed Loop
Parameters: 21-** Main Menu - Extended Closed Loop
Parameters: 22-** Application Functions
Parameters: 23-** Time-based Functions
Parameters: 24-** Application Functions 2
Parameters: 25-** Cascade Controller
Parameters: 26-** Analog I/O Option MCB 109
Parameters: 30-** Special Features
Parameters: 31-** Pressure Sensor/Bypass Option
Parameters: 32-** MCO Basic Settings
Parameters: 35-** MCB 114 Sensor Input Option
Parameters: 36-** Programmable I/O Option
Parameters: 40-** Special Settings
Parameters: 43-** Unit Readouts
Parameter Descriptions
VLT
®
HVAC Drive FC 102
26 Danfoss A/S © 10/2019 All rights reserved. M0010001
33

Danfoss vlt FC 102 Specifications

General

Brand	Danfoss
Model	vlt FC 102
Category	DC Drives
Language	English