Danfoss vlt FC 102 - Unit Readouts

Parameter
number
Parameter description Default value 4-set-up Change
during
operation
Conver-
sion index
Type
40-41 Alarm Log: Frequency 0 Hz All set-ups FALSE -1 Uint16
40-42 Alarm Log: Current 0 A All set-ups FALSE -2 Int32
40-43 Alarm Log: Voltage 0 V All set-ups FALSE -1 Uint16
40-44 Alarm Log: DC Link Voltage 0 V All set-ups FALSE 0 Uint16
40-45 Alarm Log: Control Word 0 N/A All set-ups FALSE 0 V2
40-46 Alarm Log: Status Word 0 N/A All set-ups FALSE 0 V2
5.1.31 43-** Unit Readouts
Parameter
number
Parameter description Default value 4-set-up Change
during
operation
Conver-
sion index
Type
43-0* Component Status
43-00 Component Temp. 0 °C All set-ups TRUE 100 Int8
43-01 Auxiliary Temp. 0 °C All set-ups TRUE 100 Int8
43-02 Component SW ID 0 N/A All set-ups TRUE 0
VisStr[18
]
43-1* Power Card Status
43-10 HS Temp. ph.U 0 °C All set-ups TRUE 100 Int8
43-11 HS Temp. ph.V 0 °C All set-ups TRUE 100 Int8
43-12 HS Temp. ph.W 0 °C All set-ups TRUE 100 Int8
43-13 PC Fan A Speed 0 RPM All set-ups TRUE 67 Uint16
43-14 PC Fan B Speed 0 RPM All set-ups TRUE 67 Uint16
43-15 PC Fan C Speed 0 RPM All set-ups TRUE 67 Uint16
43-2* Fan Pow.Card Status
43-20 FPC Fan A Speed 0 RPM All set-ups TRUE 67 Uint16
43-21 FPC Fan B Speed 0 RPM All set-ups TRUE 67 Uint16
43-22 FPC Fan C Speed 0 RPM All set-ups TRUE 67 Uint16
43-23 FPC Fan D Speed 0 RPM All set-ups TRUE 67 Uint16
43-24 FPC Fan E Speed 0 RPM All set-ups TRUE 67 Uint16
43-25 FPC Fan F Speed 0 RPM All set-ups TRUE 67 Uint16
Parameter Lists
VLT
®
HVAC Drive FC 102
316 Danfoss A/S © 10/2019 All rights reserved. M0010001
55