Danfoss vlt FC 102 - Page 93

3.7.3 5-20 Terminal X46/1 Digital Input
5-20 Terminal X46/1 Digital Input
Option: Function:
[0] No operation
[1] Reset
[2] Coast inverse
[3] Coast and
reset inv
[5] DC-brake
inverse
[6] Stop inverse
[7] External
Interlock
[8] Start
[9] Latched start
[10] Reversing
[11] Start reversing
[14] Jog
[15] Preset
reference on
[16] Preset ref bit 0
[17] Preset ref bit 1
[18] Preset ref bit 2
[19] Freeze
reference
[20] Freeze output
[21] Speed up
[22] Speed down
[23] Set-up select
bit 0
[24] Set-up select
bit 1
[34] Ramp bit 0
[36] Mains failure
inverse
[37] Fire Mode
[52] Run
permissive
[53] Hand start
[54] Auto start
[55] DigiPot
increase
[56] DigiPot
decrease
[57] DigiPot clear
[62] Reset Counter
A
[65] Reset Counter
B
[66] Sleep Mode
[68] Timed Actions
Disabled
[69] Constant OFF
Actions
5-20 Terminal X46/1 Digital Input
Option: Function:
[70] Constant ON
Actions
[75] MCO Specic
[78] Reset Maint.
Word
[80] PTC Card 1
[120] Lead Pump
Start
[121] Lead Pump
Alternation
[130] Pump 1
Interlock
[131] Pump 2
Interlock
[132] Pump 3
Interlock
[190] Fire Mode Ref
Bit 0
[191] Fire Mode Ref
Bit 1
[192] Fire Mode Ref
Bit 2
3.7.4 5-21 Terminal X46/3 Digital Input
5-21 Terminal X46/3 Digital Input
Option: Function:
[0] No operation
[1] Reset
[2] Coast inverse
[3] Coast and
reset inv
[5] DC-brake
inverse
[6] Stop inverse
[7] External
Interlock
[8] Start
[9] Latched start
[10] Reversing
[11] Start reversing
[14] Jog
[15] Preset
reference on
[16] Preset ref bit 0
[17] Preset ref bit 1
[18] Preset ref bit 2
[19] Freeze
reference
[20] Freeze output
[21] Speed up
[22] Speed down
Parameter Descriptions Programming Guide
M0010001 Danfoss A/S © 10/2019 All rights reserved. 91
3 3