9.9 Enclosure Airflow
225 mm (8.9 in)
225 mm (8.9 in)
225 mm (8.9 in)
e30bf699.10
Illustration 68: Airflow for E1h/E2h (Left) and E3h/E4h (Right)
225 mm (8.9 in)
e30bf700.10
Illustration 69: Airflow Using Back-wall Cooling Kits on E1h/E2h (Left) and E3h/E4h (Right)
9.10 Fastener Torque Ratings
Apply the correct torque when tightening fasteners in the locations that are listed in table 48. Too low or too high torque when
fastening an electrical connection results in a bad electrical connection. To ensure correct torque, use a torque wrench.
Specifications
Operating Guide | VLT® Refrigeration Drive FC 103
AQ275652766279en-000101 / 130R0707
156 | Danfoss A/S © 2020.01
To Next Page
Loading...
