Dascom 1330 - Page 35

Tally Dascom 1330
20
Function
Name
Key
LED
Function Description
Override
Multi Paper
[S1] → {S3}
Hold [S1] for
2 sec.
Power
(L1)
Speed
(L3)
This function overrides the Multi Paper setting in
Section 5.3. The setting procedures:
 Hold the 【Load/Eject】key for 2 seconds
while the printer is offline and paper is loaded.
The【Power/Paper Out】LED starts blinking.
 Every press on the【LF】key rotates the Multi
paper settings between Disable (L3 = off),
Standard (L3 = on), and Enhance (L3 =
blinking).
 Finally, press the【Load/Eject】key to save the
setting and terminate the procedures with the
paper ejected. The 【Power】LED starts
flashing.
Activate
Slip Profile
[S1] → {S4}
Hold [S1] for
2 sec.
Power
Online
This function conveniently recalls the top and left
margins profile to facilitate slip/voucher printing.
(Read Section 4.7 for details.)
The procedures to activate and deactivate Slip
profile:
 Hold the 【Load/Eject】key for 2 seconds
while the printer is offline and paper is loaded.
The【Power】LED blinks.
 Alternative presses on the 【Online】key
activate and deactivate the Slip profile.
Accordingly, the 【Online】 LED blinks and
lights up to indicate the activation and
deactivation, respectively.
 Finally, press the【Load/Eject】key to save the
setting and terminate the procedures with the
paper ejected. The【Power】LED stops blinking.
Micro-adjust
TOF
[S4] → {S1}
Hold [S4] for
3 sec.
Online
 Hold the 【Online】key for 3 seconds while the
printer is offline and paper is loaded. The
【Online】LED starts blinking.
 Press the【TOF】 or 【LF】keys to adjust the
TOF position precisely.
 Finally, press the【Online】key to save the
setting and terminate the procedures. The
【Online】LED stop blinking.
NOTE: Section 4.5 lists out additional operations while the printer is offline