Dascom 1330 - Tally Dascom Printer Config Tool

Tally Dascom 1330
57
3. Press OK to go into restore factory default dialog. The printer prompts:
[Restore Factory Default]
Restore factory settings ([LOAD/EJECT]=OK, [ONLINE]=Exit)?
Yes
4. At this stage you have the option of OK to restore default setting or Exit to discard the
restoration.
5. If input OK, the printer prints an asterisk “*” appending the “Yes” and prompts successful
restoration:
Restore factory settings successfully
6. The printer beeps once to indicate successful restoration.
5.9 Tally Dascom Printer Config Tool
In the CDROM is a software utility called “Tally Dascom Printer Config Tool”. This application
enables a convenient, simple, and fast way to control your printer without touching any keys
on the operation panel.
1. Start the tool installation by double clicking the “Tally Dascom Printer Config Tool
Setup.msi”.
2. Connect the printer to the system using USB cable
3. Power up the printer.
4. Run the tool from the Windows Start menu by selecting All Programs, then Dascom
Printer Setup, and then Tally Dascom Printer Setup.
5. For more information on how to use the tool, go to the Help menu and select User
Guide.