Dascom 1330 - 5.2 Paper Setup

Tally Dascom 1330
30
5.2 Paper Setup
Paper Setup
Valid Settings
Function
Single FormLen
2.5, 11/4, 3, 3.5, 11/3, 4, 5,
5.5, 6, 7, 8, 9, 10, 11, 12,
14, A4, B4, Customize
Sets the page length for single paper
Single Top
0, 1/6, 1/4, 1/3, 1/2, 2/3, 3/4,
1, Define
Defines the separation in inches from
the top edge of a single paper to the first
print line.
Single Bottom
0, 1/6, 1/4, 1/3, 1/2, 2/3, 3/4,
1, Define
Defines the separation in inches from
the bottom edge of a single paper to the
last print line.
Single Left Mrg
(1.00mm)
-7, -6, -5, -4, -3, -2, -1, 0, 1,
2, 3, 4, 5, 6, 7, Define
Compensation value added to Single
Left Mrg.
Single Top Mrg
(0.01”)
-7, -6, -5, -4, -3, -2, -1, 0, 1,
2, 3, 4, 5, 6, 7
Compensation value added to Single
Top.
Single Auto Load
Disable, 0.5sec, 1sec,
1.5sec, 2sec
Defines the settling time before a single
sheet is loaded.
Disable: Press the【Load/Eject】key
manually to load a single sheet.
Fanfold FormLen
2.5, 11/4, 3, 3.5, 11/3, 4, 5,
5.5, 6, 7, 8, 9, 10, 11, 12,
14, A4, B4, Define
Sets the Page Length for fanfold.
Fanfold Top
0, 1/6, 1/4, 1/3, 1/2, 2/3, 3/4,
1, Define
Defines the separation in inches from
the top edge of a fanfold to the first print
line.
Fanfold Bottom
0, 1/6, 1/4, 1/3, 1/2, 2/3, 3/4,
1, Define
Define the separation in inches from the
bottom edge of a fanfold to the last print
line.
Fanfold Left Mrg
(1.00mm)
-7, -6, -5, -4, -3, -2, -1, 0, 1,
2, 3, 4, 5, 6, 7, Define
Compensation value added to Fanfold
Left Mrg.
Fanfold Top Mrg
(0.01”)
-7, -6, -5, -4, -3, -2, -1, 0, 1,
2, 3, 4, 5, 6, 7
Compensation value added to Fanfold
Top.
Fanfold Auto Load
No, Yes
Yes: The printer loads paper to the first
printing position automatically when
using fanfold.
No: Press the【Load/Eject】key to load
paper when using fanfold.
Skip
No, Yes
Skips printing on perforation area.
Only valid to fanfold.
Yes：Blank lines between 2 pages.
No: No blank lines between 2 pages.