Page 9
Power on the printer
Plug in the printer to power it on. The printer does not
have a power switch.
1 Make sure the power supply cord connects to the
printer power receptacle (1).
2 Connect the power cord to the power supply (2).
3 Connect the power cord to the power outlet (3).
4 The printer powers on and the Status Light is amber.
5 When the printer is ready to print cards, the Status Light displays
steady green.
The printer must be connected to a computer (locally or through a
network) to print cards. See
"Printer Installation" on page 21.
Tips for printer power
• Wait while the printer initializes.
• Follow the guidelines for your organization about when to power
the printer on and off.
To Next Page
Loading...
