Page 84
MS-01407, MS-01408, or MS-01409 Mag Stripe Error
LRC error reading data on track 1, 2, or 3.
What is LRC?
• LRC is special data used when encoding a magnetic stripe. It is not the
data you enter.
Possible Cause 1: The card has dirt or damage on the magnetic stripe.
Solution 1: If the message appears a second time, run a printer cleaning
card.
Possible Cause 2: The magnetic stripe on the card is Low Coercivity
material and the High Coercivity setting is selected.
Solution 2: To use the cards you have, select the Low Coercivity setting. To
encode with High Coercivity, obtain High Coercivity cards. Make sure the
cards work with your magnetic stripe reader.
If you cannot fix the problem, contact your service provider for assistance.
Related Topics:
"Cleaning the printer" on page 39
"Cleaning the printer rollers" on page 41
To Next Page
Loading...
Need help?
General
