Page 39
Cleaning the printer
Run a cleaning card and change the cleaning sleeve when
changing the print ribbon. Make sure that all cards sent to the
printer have completed printing before cleaning.
1 Open the printer cover (1).
2 Remove the replaceable cleaning roller and the ribbon
cartridge (2).
3 Open the input hopper cover (3).
4 Remove unprinted cards from the input hopper (4).
5 Open the cleaning card package and remove the cleaning
card.
6 Insert the cleaning card into the input hopper (5), just past the
roller.
7 On the LCD panel, press the Enter key to view the Main
Menu.
8 Press the Up Arrow or Down Arrow key to display
“Diagnostics” and then press the Enter key.
1
1
4
5
3
2
2
1
1
2
To Next Page
Loading...
Need help?
General
