Page 62
5 The printer does not respond when
printing a card or when clicking
“Resume” on the Printer Toolbox.
• Make sure the printer is plugged in. See "Power on the printer" on
page 9.
• Make sure the printer is connected to the computer. "Connect the
printer to the network" on page 27.
• If the Status Light on the printer is blinking amber (yellow), press
the Ready .
• Power off the printer and power it on to see if communication
resumes.
• See Info Central for more detailed communication
troubleshooting information.
6 The printer cover will not close. • Make sure no extra items are inside the printer.
• Make sure the print ribbon cartridge is installed correctly. See
"Loading print ribbon" on page 7.
• If you installed or bumped the printhead cartridge, make sure it is
installed correctly. See Production in Info Central.
• Push down firmly on the front edge of the cover to latch it.
What is the problem? Try this:
To Next Page
Loading...
Need help?
General
