DataCard SD160 Installation And Administrator's Guide

SD160/SD260 Installation and Administrator’s Guide 11
Install the Optional Cable Lock
Thecablelockisauser‐installedfeaturethatdoesnotrequirespecialtoolstoinstall.Thepackage
containsaKensington®lockwithkeys,instructions,andametalsecurityplate.Thesecurityplate
isinstalled intheprinterandisdesignedtoaccommodatetheT‐baroftheKensingtonlock.
1. Prepare
theprinterbyinstallingthemetalsecurityplate:
a. Tiptheprinteronitsrightside.
b. Locatethesecurityplatereceptacleonthe
undersideoftheprintertowardthebackleft
side.
c. Insertthesecurityplateintothereceptacle
withtheopenendtowardtheprinter.
2. Followtheinstructionsincluded
withthelockto
completetheinstallation.

DataCard SD160 Specifications

General

Print Technology	Dye Sublimation
Print Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50/60 Hz
Card Capacity	100 cards input hopper, 25 cards output hopper
Card Size	CR80 (85.6 mm x 54 mm)
Operating System Support	Windows 7, Windows 8, Windows 10
Card Thickness	0.020" to 0.030" (0.51 mm to 0.76 mm)
Print Speed	Up to 150 cards per hour (YMCKT)