DataCard SD160 Installation And Administrator's Guide

SD160/SD260 Card Printers Installation and Administrator’s Guide 33
Access Printer Manager
TheinitialPrinterManagerscreenallowsuserstologonwithausernameandpasswordthat
determinetheiruseraccesslevel.Theuseraccessleveldetermineswhichmenuitems,options,
andadjustmentsareavailable.
1. Makesurethattheprinter'sLCDpaneldisplaysReady.
2. AccessPrinterManagerinoneof
thefollowingways:
 OpenthePrinterPropertieswindowfortheprinterandselectthePrinterStatustab.
 ClickConfigurePrintertolaunchPrinterManagerinyourdefaultbrowser.
OR
 Obtaintheprinter’sIPaddressandwriteitdown.Refertotheprinter’sUser’ sGuidefor
detailedinformationabouthowtoretrievetheprinterIPaddress.
 OpenawebbrowseronthePC.
 IntheAddressareaofthebrowser,enterthefollowing:
http://printer_IP_address
Forexample:http://123.12.3.123where123.12.3.123istheprinterIPaddress.
1. ThePrinterManagerLogInscreendisplays.
2. SelectthelanguageinwhichtodisplaythePrinterManagerse ssionfromtheSelectLanguage
column.
3. InthePleaseLogInsection,selectaUsernamethatmatchesyourjobresponsibilityandenter
apassword(ifrequired).Referto“PrinterManagerUserAccessLevels”onpage 32fora
descriptionofthe
useraccesslevels.

DataCard SD160 Specifications

General

Print Technology	Dye Sublimation
Print Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50/60 Hz
Card Capacity	100 cards input hopper, 25 cards output hopper
Card Size	CR80 (85.6 mm x 54 mm)
Operating System Support	Windows 7, Windows 8, Windows 10
Card Thickness	0.020" to 0.030" (0.51 mm to 0.76 mm)
Print Speed	Up to 150 cards per hour (YMCKT)