Datalogic Gryphon 2D Series User Manual

STANDARD DEFAULTS
PRODUCT REFERENCE GUIDE 311
READING PARAMETERS
Scan Mode Trigger Simple 94
Scanning Active Time 5 seconds 95
Flash On Time 10 = Flash is ON for 1 second 95
Flash Off Time 06 = Flash is OFF for 600ms 96
Double Read Timeout 0.6 second 96
Stand /Base Detection Behavior
Switch to Stand Mode/Object Detection
98
Stand Mode/Object Detection Indica-
tion (Stand Mode Flash)
Disable 99
Stand Mode/Object Detection Sensi-
tivity
Medium 99
Stand Mode/Object Detection Illumi-
nation Off Time
1 second 100
Illumination Intensity Full Intensity 100
Illuminator Refresh Frequency Normal Refresh Frequency 101
Corded Stand Mode Disable 101
Dock Detection Beep Disable 102
Corded Stand Beep Disable 102
Power On Alert
Power-up Beep
103
Good Read Beep Type Mono 103
Good Read Beep Frequency High 104
Good Read Beep Length 80 msec 105
Good Read Beeper Volume / Vibra-
tion
High 106
Vibration Feedback for Good Read Disable 106
Silent Mode Disalbe 107
RGB Good Read Enable Enable 107
RGB Good Read Color GREEN 108
Good Read LED Duration 300 msec 109
Good Read: When to Indicate After Decode 110
Green Spot Duration Short (300 msec) 111
Aiming Pointer Enable 112
Aiming Duration Timer Aiming Off After Decoding 112
PARAMETERS DEFAULT
YOUR SETTING PAGE NUMBER

Datalogic Gryphon 2D Series Specifications

General

Brand	Datalogic
Model	Gryphon 2D Series
Category	Barcode Reader
Language	English