PRODUCT REFERENCE GUIDE
309
APPENDIX B
STANDARD DEFAULTS
The most common configuration settings are listed in the “Default” column of the table
below. Page references are also provided for feature descriptions and programming bar
codes for each parameter. A column has also been provided for recording of your pre-
ferred default settings for these same configurable features.
Table 34 Standard Defaults
PARAMETERS DEFAULT
YOUR SETTING PAGE NUMBER
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore Obey 35
USB Suspend Mode Enable 35
RS-232 ONLY
Baud Rate 9600 37
Data Bits 8 Data Bits 38
Stop Bits 1 Stop Bit 38
Parity None 39
Handshaking Control RTS 40
RS-232/USB-COM
Intercharacter Delay No Delay 42
Beep On ASCII BEL Disable 43
Beep On Not on File Enable 43
ACK NAK Options Disable 44
ACK Character ‘ACK’ 45
NAK Character ‘NAK’ 45
ACK NAK Timeout Value 200 msec 46
ACK NAK Retry Count 3 Retries 45
ACK NAK Error Handling Ignore Errors Detected 47
To Next Page
Loading...
Need help?
General
