GLOBAL INTERFACE FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
35
GLOBAL INTERFACE FEATURES
The following interface features are configurable by all interface types.
To set features specific to your interface, turn to that section of this manual.
Host Commands — Obey/Ignore
This option specifies whether the reader will obey or ignore host commands. When set
to ignore, the reader will ignore all host commands except those necessary for:
• service mode
• flash programming mode
• keeping the interface active
• transmission of labels.
USB Suspend Mode
This setting enables/disables the ability of USB interfaces to enter suspend mode.
$CIFIH00
Host Commands = Obey
(Do Not Ignore Host Commands)
Host Commands = Ignore
$CIFIH01
$CUSSE00
USB Suspend Mode = Disable
USB Suspend Mode = Enable
$CUSSE01
To Next Page
Loading...
Need help?
General
