ENTER/EXIT PROGRAMMING MODE READING PARAMETERS
106
GRYPHON™ I GD/GBT/GM4200
Green Spot Duration
Specifies the duration of the good read pointer beam after a good read.
Illuminator Intensity (Power Level)
This setting selects the illumination level for bar code reading.
$CLSSP00
Green Spot Duration = Disable (Green Spot is Off)
Green Spot Duration = Short (300 msec)
$CLSSP01
$CLSSP02
Green Spot Duration = Medium (500 msec)
Green Spot Duration = Long (800 msec)
$CLSSP03
$CIPWL01
Illuminator Intensity = Low
Illuminator Intensity = Medium
$CIPWL06
$CIPWL0C
Illuminator Intensity = High
To Next Page
Loading...
Need help?
General
