112
GRYPHON™ I GD/GBT/GM4200
DISABLE ALL SYMBOLOGIES
Scan this label to disable all symbologies.
COUPON CONTROL
This feature is used to control the method of processing coupon labels.
Options are:
• Allow all — allow all coupon bar codes to be decoded
• Enable only UPC/EAN — enables only UPC/EAN coupon decoding
• Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
To set this feature:
1. Scan the Enter/Exit bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused
bar codes on this and the facing page to ensure that the scanner sees only the bar
code you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit bar code.
$AD
Disable All Symbologies
$CCPCL00
Coupon Control = Allow all
Coupon Control = Enable only UPC/EAN
$CCPCL01
$CCPCL02
Coupon Control = Enable only GS1 DataBar
To Next Page
Loading...
Need help?
General
