LABEL ID ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
83
LABEL ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of hex
0x01-0xFF), used to identify a bar code (symbology) type. It can be appended previous
to or following the transmitted bar code data depending upon how this option is
enabled. This feature provides options for configuring custom Label IDs as a pre-loaded
set (see "Label ID: Pre-loaded Sets" below) or individually per symbology (see
"Label ID:
Set Individually Per Symbology" on page 84). If you wish to program the scanner to always
include an industry standard label identifier for ALL symbology types, see the previous
feature
"Global AIM ID" on page 82.
Label ID: Pre-loaded Sets
The scanner supports two pre-loaded sets of Label IDs, the USA set and the EU set. See
"Label ID: Pre-loaded Sets" on page 234 for more information concerning the pre-loaded
sets that are provided.
CAUTION: When changing from one Label ID set to another, all other scan-
ner configuration settings, including the host interface type, will be erased
and set to the factory defaults. Any custom configuration or custom
defaults will be lost.
$AE
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
$Ae
To Next Page
Loading...
Need help?
General
