SETUP
10
GRYPHON™ I GD/GBT/GM4200
POSITIONING THE BASE STATION
The base station/charger may be set up in desk application to hold the reader in two dif-
ferent positions, either a horizontal or vertical position, in order to provide the most
c
omfortable use depending on the needs.
Base Station Positions and Related Clips to be Used
Figure 5 - Horizontal Position
This position is preferred, unless a different specific positioning is required, for its
utmost ease of insertion as well as the minimum effort and attention required by the
customer when docking the scanner.
To Next Page
Loading...
Need help?
General
