Datalogic Gryphon I GM440 Series User Manual

Enter/Exit Programming Mode
110 Gryphon™ I GD44XX/GBT4400/GM440X
Stand Mode Indication
This operation is useful for indicating when the reader is in Stand Mode. If
enabled, the blue indicator will blink when Stand Mode scanning is active. If
reader detects motion (or removed from base station for cordless models)
and switches out of Stand Mode into Triggered Mode, blinking will stop until
Stand Mode is active again.
DEFAULT
$CSMFL00(CR)
Stand Mode Indication = Disable
$CSMFL01(CR)
Stand Mode Indication = Enable

Datalogic Gryphon I GM440 Series Specifications

General

Brand	Datalogic
Model	Gryphon I GM440 Series
Category	Barcode Reader
Language	English