Product Reference Guide
319
Appendix B
Standard Defaults
The most common configuration settings are listed in the “Default” col-
umn of the table below. Page references are also provided for feature
descriptions and programming bar codes for each parameter. A column
has also been provided for recording of your preferred default settings
for these same configurable features.
Table 53. Standard Defaults
Parameter Default Your Setting
Page
Number
GLOBAL INTERFACE FEATURES
Host Commands — Obey/Ignore
Obey 41
USB Suspend Mode
Disable 41
RS-232 ONLY
Baud Rate
9600 44
Data Bits
8 Data Bits 45
Stop Bits
1 Stop Bit 45
Parity
None 46
Handshaking Control
RTS 47
RS-232/USB-Com
Intercharacter Delay
No Delay 49
Beep On ASCII BEL
Disable 49
Beep On Not on File
Enable 50
ACK NAK Options
Disable 51
ACK Character
‘ACK’ 52
NAK Character
‘NAK’ 52
ACK NAK Timeout Value
200 ms 53
ACK NAK Retry Count
3 Retries 53
ACK NAK Error Handling
Ignore Errors Detected 54
To Next Page
Loading...
Need help?
General
