Datalogic Gryphon I GM440 Series - Codabar Length Control; Codabar Quiet Zones

Enter/Exit Programming Mode1D Code Selection
184 Gryphon™ I GD44XX/GBT4400/GM440X
Codabar Quiet Zones
Specifies the number of quiet zones for Codabar labels. Quiet zones are
blank areas at the ends of a bar code and are typically 10 times the width of
the narrowest bar or space in the label.
$CCBLO02(CR)
Codabar Quiet Zones = Quiet Zones on two sides
$CCBLO03(CR)
Codabar Quiet Zones = Small Quiet Zones on two sides
DEFAULT
Codabar Length Control
This feature specifies either variable length decoding or fixed length decod-
ing for the Codabar symbology.
Variable Length: For variable length decoding, a minimum and maximum
length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
DEFAULT
$CCBLC00(CR)
Codabar Length Control = Variable Length
$CCBLC01(CR)
Codabar Length Control = Fixed Length