Datalogic Gryphon I GM440 Series - I 2 of 5 Check Character Transmission; I 2 of 5 Length Control

Enter/Exit Programming Mode1D Code Selection
168 Gryphon™ I GD44XX/GBT4400/GM440X
I 2 of 5 Check Character Transmission
Enable this option to transmit the check character along with I 2 of 5 bar
code data.
$CI2CT00(CR)
I 2 of 5 Check Character Transmission = Don’t Send
$CI2CT01(CR)
I 2 of 5 Check Character Transmission = Send
DEFAULT
I 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decod-
ing for the I 2 of 5 symbology.
Variable Length: For variable length decoding, a minimum and maximum
length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
DEFAULT
$CI2LC00(CR)
I 2 of 5 Length Control = Variable Length
$CI2LC01(CR)
I 2 of 5 Length Control = Fixed Length