Datalogic Gryphon I GM440 Series User Manual

Enter/Exit Programming Mode
248 Gryphon™ I GD44XX/GBT4400/GM440X
WIRELESS BEEPER FEATURES
Several options are available to configure beeper behavior for RF operation.
Good Transmission Beep
Enables/disables the Good Transmission Beep indication. When enabled, a
beep occurs when a Label is correctly transmitted to the base.
$CBTAB00(CR)
Good Transmission Beep = Disable
$CBTAB01(CR)
Good Transmission Beep = Enable
DEFAULT
Beep Frequency
Adjusts radio-specific beep indications to sound at a low, medium or high
frequency, selectable from the list below (controls the beeper’s pitch/tone).
DEFAULT
$CBTBF00(CR)
Beep Frequency = Low
$CBTBF01(CR)
Beep Frequency = Medium
$CBTBF02(CR)
Beep Frequency = High

Datalogic Gryphon I GM440 Series Specifications

General

Brand	Datalogic
Model	Gryphon I GM440 Series
Category	Barcode Reader
Language	English