To Next Page

To Previous Page

Enter/Exit Programming Mode

112

Gryphon™ I GD44XX/GBT4400/GM440X

Pick Mode

Specifies the ability of the reader to decode labels only when they are close

to the center of the aiming pattern. This allows the reader to accurately tar-

get labels when they are placed close together, such as on a pick sheet.

This feature is not compatible with Multiple Labels Reading in a Volume.

DEFAULT

$CSNPM00(CR)

Pick Mode = Disable

$CSNPM01(CR)

Pick Mode = Enable

Stand Mode Sensitivity

Sets the sensitivity level for stand mode wakeup. Choices are low, medium

and high.

$CSMSE00(CR)

Stand Mode Sensitivity = Low

$CSMSE01(CR)

Stand Mode Sensitivity = Medium

DEFAULT

$CSMSE02(CR)

Stand Mode Sensitivity = High

Datalogic Gryphon I GM440 Series User Manual

Other manuals for Datalogic Gryphon I GM440 Series