Datalogic Gryphon I GM440 Series - Optional Add-On Timer

Enter/Exit Programming Mode1D Code Selection
140 Gryphon™ I GD44XX/GBT4400/GM440X
Optional Add-On Timer
This option sets the time the reader will look for an add-on when an add-on
fragment has been seen and optional add-ons are enabled. (Also see
"Optional GS1-128 Add-On Timer" on
page 143.)
$CADOT01(CR)
Optional Add-on Timer = 10ms
$CADOT02(CR)
Optional Add-on Timer = 20ms
$CADOT03(CR)
Optional Add-on Timer = 30ms
$CADOT04(CR)
Optional Add-on Timer = 40ms
$CADOT05(CR)
Optional Add-on Timer = 50ms