Datalogic Gryphon I GM440 Series - Aztec Code; Aztec Code Enable; Disable; Aztec Code Length Control; Aztec Code Set Length 1

Enter/Exit Programming Mode Aztec Code
218 Gryphon™ I GD44XX/GBT4400/GM440X
Aztec Code
Aztec Code Enable / Disable
Enables/disables the ability of the reader to decode Aztec Code labels.
DEFAULT
$CAZEN00(CR)
Aztec Code = Disable
$CAZEN01(CR)
Aztec Code = Enable
Aztec Code Length Control
This feature specifies either variable length decoding or fixed length decod-
ing for this symbology.
Variable Length: For variable length decoding, a minimum and maximum
length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
DEFAULT
$CAZLC00(CR)
Aztec Code Length Control = Variable Length
$CAZLC01(CR)
Aztec Code Length Control = Fixed Length
Aztec Code Set Length 1
Specifies one of the bar code lengths for Aztec Code Length Control. Length
1 is the minimum label length if in Variable Length Mode, or the first fixed
length if in Fixed L
ength Mode. Characters can be set from 0001 to 3,832
characters in increments of 0001 (pad with zeroes).