2D Global Features Enter/Exit Programming Mode
Product Reference Guide
199
Micro QR Code Set Length 2
This feature specifies one of the bar code lengths for Micro QR Code Length
Control. Length 2 is the maximum label length if in Variable Length Mode,
or the second fixed length if in Fixed Length Mode. Characters can be set
from 0001 to 0035 characters in increments of 0001 (pad with zeroes).
See
page 268 for detailed instructions on setting this feature.
Select QR Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
repre-
senting your desired character(s). End by scanning
the ENTER/EXIT bar
code again.
Make a mistake? Scan the CANCEL bar code to abort
and not
sav
e the entry string. You can then start
again at the beginning.
Length 2 is 0035 Characters
To Next Page
Loading...
Need help?
General
Weight and Dimensions
