Datalogic PowerScan PBT9500 User Manual

Product Reference Guide 49
DATA FORMAT
GLOBAL PREFIX/SUFFIX (HEADER/TERMINA-
TOR)
on page 50
GLOBAL AIM ID on page 51
LABEL ID starting on page 55
•Label ID: Pre-Loaded Sets
•Individually Set Label ID
•Label ID Control
•Label ID Symbology Selection − 1D Symbol-
ogies
•Label ID Symbology Selection − 2D Symbol-
ogies
CASE CONVERSION on page 61
CHARACTER CONVERSION on page 61
CAUTION
It is not recommended to use these features with IBM inter-
faces.
The features in this chapter can be used to build specific user-defined data
into a message string. See “References” starting on
page 269 for more
detailed instructions on setting these features.

Datalogic PowerScan PBT9500 Specifications

General

Type	Handheld bar code reader
Wavelength	680 nm
Sensor type	Laser
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 40 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	-
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, MaxiCode, Micro QR Code, QR Code
Battery life	10 h
Charging time	4 h
Battery capacity	2150 mAh
Power source type	Battery
Number of reads per charge	30000
Number of batteries supported	1
Wireless range	100 m
Operating frequency	2400 - 2480 MHz
Standard interfaces	USB, RS-232
Connectivity technology	Wired & Wireless
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Buzzer	Yes
Certification	IEC 62471 Class 1 LED
Product color	Black, Yellow
Protection features	Shock resistant, Water resistant
International Protection (IP) code	IP65
Cables included	RS-232

Weight and Dimensions

Depth	74 mm
Width	110 mm
Height	212 mm
Weight	380 g