ENTER/EXIT PROGRAMMING MODE 1D SYMBOLOGIES
154
POWERSCAN™ PD/PM96XX
STANDARD 2 OF 5
The following options apply to the Standard 2 of 5 symbology.
Standard 2 of 5 Enable/Disable
When disabled, the reader will not read Standard 2 of 5 bar codes.
Standard 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Standard 2 of 5
check character.
$CS2EN00
Standard 2 of 5 = Disable
Standard 2 of 5 = Enable
$CS2EN01
$CS2CC00
Standard 2 of 5 Check Character Calculation
= Disable
Standard 2 of 5 Check Character Calculation = Enable
$CS2CC01
To Next Page
Loading...
Need help?
General
