Datalogic PowerScan PD9630-HP User Manual

SETUP
22 POWERSCAN™ PD/PM96XX
Disconnecting BC9630 cables
To disconnect the cables, power off the base station, unlock the lever and press down
the cable clip using a pen or a similar tool.
1. Power off the cradle and unlock the lever
2. Press down the cable clip using a pen or a similar tool.
3. Pull out the multi-interface cable and put the lever back into lock position.
Unlock the lever
Press down
the cable clip
Cable
clip
Lock Position

Datalogic PowerScan PD9630-HP Specifications

General

Brand	Datalogic
Model	PowerScan PD9630-HP
Category	Barcode Reader
Language	English