DaVinci fireplace - Secure the Fireplace to the Alignment Track

To Next Page

To Previous Page

Installation (for qualified installers only) 29

Secure the Fireplace to the Alignment Track

Verify the Fireplace is Level Before Proceeding

Use a level to verify the fireplace is level (check several spots across the entire length). Use

shims (or washers/spacers) under the fireplace, if necessary, to make sure the fireplace is

level.

The alignment track as hoirzontal holes that allow for the fireplace to be secured to the track. Make sure

the fireplace is correctly positioneed left to right, then use #8 zip screws to secure the fireplace to the

track.