DaVinci fireplace - Typical Framing Dims. - Island Configuration

36 Installation (for qualified installers only)
© Travis Industries 4150126 100-01418
Typical Framing Dims. – Island Configuration
Version Width (x) Height (y)
12” Glass
Height (y)
20” Glass
Height (y)
30” Glass
Height (y)
36” Glass
84” Island 84.125” (2137mm)
50.625”
(1286mm)
58.625”
(1490mm)
68.625”
(1744mm)
74.625”
(1896mm)
96” Island 96.125” (2442mm)
108” Island 108.125” (2747mm)
120” Island 120.125” (3052mm)
132” Island 132.125” (3356mm)
19.625"
499mm
x
y
The framing above the fireplace
must be self-supporting (the
fireplace is not load-bearing).
When using a top plate, you may need to notch it at
the center to provide adequate vent clearance.
3" (77mm) Maximum for vent clearance.
Do not place vertical framing directly in the
center above the fireplace - it will infringe
upon the vent clearance requirements.