DriveRack™ User Manual
• From Program mode, press the UTILITY button and move to the security
page that appears as follows:
• If you wish to change the security level clearance at this point, rotate the
DATA wheel to select either the Medium or High level of clearance and
the screen will appear as follows:
• Pressing the I/O 3 button will bring you to the following screen, which will
ask you for your password:
• Once you have entered your security password, simply press the STORE
button to store the password and the clearance level will be changed. To
abort this procedure at any time, simply press PROGRAM/CONFIG button.
• Press the PROGRAM/CONFIG button to return to normal operation.
• After a user with medium or high clearance has completed any edit changes,
he or she must remember to set the security level back to low for normal
use.
The 240 and 241 DriveRack™ units allow you to set the unit to either scroll through programs
in a sequential manner, or create custom program lists from within the Utility menu. This list
makes it convenient for accessing and grouping selected programs The program list cannot be
changed if the security level is set to lockout access to the program list. The procedure for set-
ting up the program list is as follows.
5.4 Program Change/Program List
To Next Page
Loading...
