DeLaval MPCII User Manual

Troubleshooting
DeLaval milking point controller MPCII
94381001.pdf2006-07-20
DeLaval milking point
controller MPCII
Troubleshooting
Problem Cause ActionProblem Cause Action
ERR1: flashing in the display. Unauthorised command. Read this MEMO to enter the
correct F-command.
ERR1: flashing in the display. Unauthorised command. Read this MEMO to enter the
correct F-command.
ERR4: flashing in the display. The MPCII is missing contact
with the MM15.
1. Check the milk meter
parameter in the MPCII with
function F62.
ERR4: flashing in the display. The MPCII is missing contact
with the MM15.
1. Check the milk meter
parameter in the MPCII with
function F62.
2. Check the milk meter
parameter set in the ALPRO
processor is correct.
2. Check the milk meter
parameter set in the ALPRO
processor is correct.
3. Check the terminal
connections on the MPCII to
the milk meter.
3. Check the terminal
connections on the MPCII to
the milk meter.
P ERR: Overload on the pulsator
outputs.
Check the pulsator.P ERR: Overload on the pulsator
outputs.
Check the pulsator.
93(94)

DeLaval MPCII Specifications

General

Brand	DeLaval
Model	MPCII
Category	Controller
Language	English