Operation
DeLaval milking point controller MPCII
94381001.pdf2006-07-20
F371–F374 – Cow status
System
See function 3:7:1 on the system processor
These four functions correspond to function
3:7:1, COW STATUS. Below is shown an
example on how the cow status could be set
in the system processor.
COW STATUS WAIT DAYS 1 2 3 4
COW NO: 104 – – – – X –
GROUP NO: 1 – 4 X X – –
2 2 – X – –
1: – 3 – X – – –
✽
Example
The adjoining picture shows the system
processor display with the four cow status
set. The diagram below explains the
settings in a time perspective.
The four cow status are:
= Do not milk the cow
= Dump the milk
= Treat the cow
= Separate the cow
Don't milk
Dump
Treat
Separate
Day No.
1 2 3 4 5 6 7 8 and so on
Today
Graphical representation of the above display
The first status Do not milk the cow is set for
milking session No.3, will start immediately,
and last for ever.
The second status Dump the milk is set for
milking sessions No.1 and No.2, will start
immediately, and last for 4 days.
The third status Treat the cow is set for
83(94)
To Next Page
Loading...
Need help?
General