DeLaval MPCII User Manual

Operation
DeLaval milking point controller MPCII
94381001.pdf2006-07-20
The duration of the latest confirmed milk
yield registration is shown.
- Press ↑ on the MPCII to step forward to
next data
- Finish by pressing F and ↑, or wait 30
seconds for time-out.
F32 – Today's and yesterday's milk
yields read/write function
System
The MPCII display shows milk yield today
and milk yield yesterday. It starts showing
the yields from milking session No.1, then
session No.2, and, finally session No.3.
Step by pressing ↑. To modify a yield value,
it is necessary to confirm yield using F4↑ or
open output door before entering the new
value.
- Press F, 3, 2, and ↑
The milk yield from today's milking No.1 is
displayed
- Press ↑
The milk yield from yesterday's milking No.1
is displayed
- Press ↑
The milk yield from today's milking No.2 is
displayed
- Press ↑
The milk yield from yesterday's milking No.2
is displayed
- Press ↑ to step through the milk yields
from milking session No.3
- Finish by pressing F and ↑, or wait 30
seconds for time-out
F39 – Expected milk yield read only
System
This function shows expected milk yield.
64(94)

DeLaval MPCII Specifications

General

Brand	DeLaval
Model	MPCII
Category	Controller
Language	English