Table 2 DD9900 system racking locations (continued)
Component Configuration Rack location
FS25 location with DS60
shelves
Single node and HA U39-40
DS60 locations Single node or HA U02-U11, U20-U34
Rail kit components
The 3U sliding rail kits secure the server in the cabinet and enable it to be extended from the
cabinet to remove the system cover and access the internal field-replaceable units (FRUs).
The rails are compatible with racks with square holes, unthreaded round holes, and threaded round
holes.
Figure 6 Sliding rail assembly - 3U systems
1. Sliding rail (2)
2. Hook-and-loop strap (2)
The rails are compatible with racks with square holes, unthreaded round holes, and threaded round
holes.
The rail kit also includes a unique cable management (CMA) bracket assembly that consists of
inner and outer brackets, and screws to attach the brackets to the rails.
Install the System in the Rack
Dell EMC PowerProtect DD9900 System Installation Guide 21
To Next Page
Loading...
