Dell Force10 Z9000 - Show Commands

284 | Control Plane Policing (CoPP)
www.dell.com | support.dell.com
Sample Config for CoPP CPU queue configuration
Create QoS Policy
FTOS#conf
FTOS(conf)#qos-policy-input cpuq_1
FTOS(conf-qos-policy-in)#rate-police 3000 40 peak 500 40
FTOS(conf-qos-policy-in)#exit
FTOS(conf)#qos-policy-input cpuq_2
FTOS(conf-qos-policy-in)#rate-police 5000 80 peak 600 50
FTOS(conf-qos-policy-in)#exit
Assign QoS Policy to Queues
FTOS(conf)#policy-map-input cpuq_rate_policy cpu-qos
FTOS(conf-qos-policy-in)#service-queue 5 qos-policy cpuq_1
FTOS(conf-qos-policy-in)#service-queue 6 qos-policy cpuq_2
FTOS(conf-qos-policy-in)#service-queue 7 qos-policy cpuq_1
Create Control Plane Service Policy
FTOS#conf
FTOS(conf)#control-plane
FTOS(conf-control-plane)#service-policy rate-limit-cpu-queues cpuq_rate_policy
Show commands
Use the show cpu-queue rate command to view the rates for each queue.
FTOS#show cpu-queue rate cp
Service-Queue Rate (PPS)
-------------- -----------
Q0 1300
Q1 300
Q2 300
Q3 300
Q4 2000
Q5 400
Q6 400
Q7 1100
FTOS#