Dell Force10 Z9000 - Time out of EXEC Privilege Mode

66 | Management
www.dell.com | support.dell.com
To configure authentication for a terminal line:
In
Configuring Login Authentication on a Terminal Line VTY lines 0-2 use a single authentication method
line.
Configuring Login Authentication on a Terminal Line
FTOS(conf)#aaa authentication login myvtymethodlist line
FTOS(conf)#line vty 0 2
FTOS(config-line-vty)#login authentication myvtymethodlist
FTOS(config-line-vty)#password myvtypassword
FTOS(config-line-vty)#show config
line vty 0
password myvtypassword
login authentication myvtymethodlist
line vty 1
password myvtypassword
login authentication myvtymethodlist
line vty 2
password myvtypassword
login authentication myvtymethodlist
FTOS(config-line-vty)#
Time out of EXEC Privilege Mode
EXEC timeout is a basic security feature that returns FTOS to the EXEC mode after a period of inactivity
on terminal lines.
Step Task Command Syntax Command Mode
1 Create an authentication method list.
You may use a mnemonic name or
use the keyword default. The default
authentication method for terminal
lines is local, and the default method
list is empty.
aaa authentication login {method-list-name |
default} [method-1] [method-2] [method-3]
[method-4] [method-5] [method-6]
CONFIGURATION
2 Apply the method list from Step 1 to
a terminal line.
login authentication {method-list-name |
default}
CONFIGURATION
3 If you used the line authentication
method in the method list you
applied to the terminal line,
configure a password for the terminal
line.
password LINE