56 | Management
www.dell.com | support.dell.com
Log Messages in the Internal Buffer
All error messages, except those beginning with %BOOTUP (Message), are log in the internal buffer.
Configuration Task List for System Log Management
The following list includes the configuration tasks for system log management:
• Disable System Logging
• Send System Messages to a Syslog Server
Disable System Logging
By default, logging is enabled and log messages are sent to the logging buffer, all terminal lines, console,
and syslog servers.
Enable and disable system logging using the following commands:
Message 1 BootUp Events
%BOOTUP:RPM0:CP %PORTPIPE-INIT-SUCCESS: Portpipe 0 enabled
Task Command Syntax Command Mode
Disable all logging except on the console.
no logging on CONFIGURATION
Disable logging to the logging buffer.
no logging buffer CONFIGURATION
Disable logging to terminal lines.
no logging monitor CONFIGURATION
Disable console logging.
no logging console CONFIGURATION
To Next Page
Loading...
