Dell Force10 Z9000 - Add a Static Entry in the Binding Table; Clear the Binding Table; Display the Contents of the Binding Table

Dynamic Host Configuration Protocol (DHCP) | 325
Enable DHCP snooping
Add a static entry in the binding table
Clear the binding table
Display the contents of the binding table
Step Task Command Syntax Command Mode
1 Enable DHCP Snooping globally. ip dhcp snooping CONFIGURATION
2 Specify ports connected to DHCP servers as trusted. ip dhcp snooping trust INTERFACE
3 Enable DHCP Snooping on a VLAN. ip dhcp snooping vlan CONFIGURATION
Task Command Syntax Command Mode
Add a static entry in the binding table. ip dhcp snooping binding mac EXEC Privilege
Task Command Syntax Command Mode
Delete all of the entries in the binding
table
clear ip dhcp snooping binding EXEC Privilege
Task Command Syntax Command Mode
Display the contents of the binding
table.
show ip dhcp snooping EXEC Privilege