• Disabled
• Enabled
• Enabled w/PXE
System Management
Default Setting: Enabled w/PXE
Allows you to control the systems
management mechanism. The options are:
• Disabled
• DASH/ASF 2.0
Parallel Port
Default Setting: DASH/ASF 2.0
Allows you to configure the parallel port
on the docking station. The options are:
• Disabled
• AT
• PS2
• ECP
Serial Port
Default Setting: AT
Allows you to configure the integrated
serial port. The options are:
• Disabled
• COM1
• COM2
• COM3
• COM4
SATA Operation
Default Setting: COM1
Allows you to configure the internal SATA
hard-drive controller. The options are:
• Disabled
• ATA
• AHCI
• RAID On
Default Setting: RAID On
97
To Next Page
Loading...
