Dell PowerConnect 6024 - Defining SNTP Authentication Methods

114 Configuring System Information
www.dell.com | support.dell.com
Defining SNTP Authentication Methods
The SNTP Authentication page enables SNTP authentication between the device and a SNTP
server. The SNTP server is also selected in the
SNTP Authentication page.
Click
System → SNTP → Authentication in the tree view to open the SNTP Authentication page.
Figure 6-8. SNTP Authentication
The SNTP Authentication page contains the following fields:
SNTP Authentication — If enabled, requires authenticating an SNTP session between the device
and an SNTP server.
Encryption Key ID — Contains a list of user-defined key IDs used to authenticate the SNTP server
and device. Possible field values are 1 to 4294967295.
Authentication Key (1-8 Characters) — The key used for authentication.
Trusted Key — Check the check box to s pecify the encryption key used (Unicast/Anycast) or
elected (Broadcast) to authenticate the SNTP server..
Remove — Check the check box to remove the selected authentication key.
Adding an SNTP Authentication Key
1 Open the SNTP Authentication page.
2 Click Add .
The
Add Authentication Key page opens: