Dell PowerConnect 6024 - Interface Configuration Mode; CLI Examples

58 Using Dell OpenManage Switch Administrator
www.dell.com | support.dell.com
Interface Configuration Mode
Interface configuration commands modify specific IP interface settings, including bridge-group,
description, and so forth. The
Interface Configuration modes are:
•
VLAN — Contains commands to create and configure a VLAN as a whole, for example, to
create a VLAN and apply an IP address to the VLAN.
•
Port Channel — Contains commands for configuring Link Aggregation Groups (LAG).
•
IP — Contains commands for managing IP interfaces.
•
Out-of-Band-Ethernet — Contains commands for managing and configuring the
management connections.
CLI Examples
CLI commands are provided as configuration examples. For a full description of the CLI
commands, including examples, refer to your switch’s
CLI Reference Guid e.