Configuring the Switch 89
Enabling Web Access (HTTP Server)
1
To prevent problems that may occur when using an HTTP proxy server, disable (uncheck) the
proxy setting on the browser.
a
In Microsoft Internet Explorer, click
Tools
→
Internet Options
.
b
Click the
Connections
tab and then click
LAN Settings
to display the
Local Area
Network (LAN) Settings
window.
c
Ensure that the
Use a proxy server
check box is cleared, and then click
OK
.
Figure 5-5. Local Area Network (LAN) Settings Window
d
Click
OK
to close the
Internet Options
window.
2
In the browser window enter the IP previously configured on the device (with or without
http:// prefix).
To Next Page
Loading...
