156 Configuring System Information
www.dell.com | support.dell.com
Enabling ARP Proxy
Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical
addresses. The
ARP Proxy
page allows network managers to enable ARP Proxy on the switch.
To open the
ARP Proxy
page, click
System
→
IP Addressing
→
ARP Proxy
in the tree view.
Figure 6-34. ARP Proxy
The
ARP Proxy
field enables the device to respond to ARP requests for located nodes. If disabled,
the device responds with its own MAC address
Enabling ARP
1
Open the
ARP Proxy
page.
2
Select
Enabled
in the
ARP Proxy
field.
3
Click
Apply Changes
.
The ARP Proxy is enabled on the device.
To Next Page
Loading...
