Cable, Port, and Pinout Information 49
Figure 3-4. Serial Connection to Switch
AC Power Connection
1
Using a 5-foot (1.5 m) standard power cable with safety ground connected, connect the power
cable to the AC main socket located on the rear panel (see Figure 3-5).
2
Connect the power cable to a grounded AC outlet.
NOTE: It is recommended that you connect the second power supply to a different power source.
3
Confirm that the device is connected and operating correctly by examining the LEDs on the
front and rear panel.
For a complete explanation of the LEDs, see "Hardware Description."
4
Repeat the procedure for the second power supply.
To Console
To Next Page
Loading...
