186 Configuring System Information
www.dell.com | support.dell.com
Assigning Users Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed on the
Local User Database
page.
The following is an example of the CLI commands:
console (config)#username bob password lee privilege 15
console# set username bob active
Defining Line Passwords
Use the
Line Password
page to define line passwords for management methods.
To open the
Line Password
page, click
System > Management Security > Line Password
in the
tree view.
Table 6-34. Local User Database CLI Commands
CLI Command Description
username
name
[password
password
]
[privilege
level
]
[encrypted]
Establishes a username-based authentication
system.
set username
name
active
Reactivates a locked user account.
To Next Page
Loading...
